How to Test a Used Leatherman Before Reselling It (Checklist)

A 15-minute bench test for used Leatherman multi-tools from auctions, estate sales or thrift stores, covering what to check, what to fix, what to leave alone and how to describe faults honestly in your eBay listing.

Used Leatherman multi-tools often turn up in auction lots, estate boxes and thrift bins. Many work fine. Some have a weak lock, a chipped blade or pliers that don't line up, or turn out to be a different model than the lot said. Buyers who paid for a "working" tool notice these faults within a minute of opening the box.

This checklist takes about 15 minutes per tool. It covers what to look at and in what order, and what to write in your listing. It does not promise your tool will sell or what it will sell for. Price it from your own eBay Sold search.

What you need: good light, a paper towel, a piece of paper, a scrap of insulated copper wire, a few screws (Phillips and flat), a phone camera and a notepad.

Step 1: Confirm it's a genuine Leatherman, and which model

Copies and look-alike tools exist, and auction descriptions get model names wrong.

If you can't confirm the model, don't put a model name in the title. "Leatherman multi-tool" plus clear photos is more honest than guessing.

Step 2: Do a first look before cleaning

Photograph the tool as received, both sides, open and closed. If a buyer later says you sent the wrong tool, these photos show what you had.

Then check:

Step 3: Test the pliers and wire cutters

The pliers are the main tool, and they are what buyers test first.

  1. Open and close the pliers 10 times. The motion should be smooth, with no grinding or catching. Some stiffness is normal on a dirty tool.
  2. Check the jaw alignment. Close the jaws and hold them up to light. The tips should meet, and the gripping surfaces shouldn't overlap side to side. Misaligned jaws usually mean the tool was used as a pry bar.
  3. Grip test: clamp a screw head in the needlenose tips and twist. The jaws shouldn't slip or spread.
  4. Wire cutter test: cut the insulated copper wire. It should cut cleanly with a firm squeeze. If it crushes or leaves a strand, look for a chip or a gap in the cutter edges.
  5. Check the pivot: hold one handle and wiggle the other. A little play is normal. A loose, clunky pivot should be noted.

Do not cut hardened steel, piano wire or springs to "test" the cutters. That can chip a good edge and leave you with a fault you have to disclose.

Step 4: Test every blade and implement

Work through each tool one at a time, and tick it off on your notepad.

Step 5: Clean it (lightly) and test again

Light cleaning is fine, and it improves photos. Don't make permanent changes.

After cleaning, run Steps 3 and 4 again quickly. Dirt sometimes hides faults, and cleaning sometimes frees up a stiff tool.

Step 6: Grade it and decide how to list

Use plain categories you can defend:

Don't mention or imply manufacturer warranty coverage in your listing. Coverage depends on the manufacturer's current terms and its own inspection, and you can't promise how they'll handle a claim.

Fill-in test record (copy this for each tool)

Listing description template

Keep it short and factual. Replace every bracket and delete any line that isn't true.

> Used Leatherman [model, or "multi-tool" if unconfirmed]. [Retired/discontinued model, only if confirmed.] > > Tested by hand: pliers [result], wire cutters [result], blades [opening and locking results], saw/files/drivers [results]. > > Condition: [wear, scratches, rust, engraving, resharpened edges]. Faults: [list each one, or "none found in my testing"]. > > Included: [tool only / sheath]. Not included: box, paperwork, or anything not pictured.

Photos to take: both sides closed, pliers open, each blade open, close-ups of the blade edges, the logo stamp, any engraving, any rust or damage, and every included item.

Common mistakes

Once this checklist is routine, a box of mixed multi-tools takes an afternoon to sort into tools to list, parts lots and tools not worth the shipping cost.

Want the full done-for-you kit?
Pass-by-Default Auction-to-eBay Flip Kit: Bid Cap Calculator, Buy Sheet and Listing Templa ยท $14.99
Get it on Gumroad