How to Calculate a HiBid Max Bid With Buyer's Premium (+ Example)

A step-by-step formula for turning an eBay Sold price into a hard maximum bid on a HiBid lot after buyer's premium, sales tax, inbound shipping and eBay fees. Includes a fill-in worksheet and a worked example using a used multi-tool.

On a HiBid lot, the current bid is not your price. Your real cost includes the hammer price, the buyer's premium, any sales tax, and shipping that is often billed after the auction ends. If you bid as high as "a bit under what it sells for on eBay," you can win the lot and still lose money.

This page shows how to work backward from a realistic resale price to a maximum hammer price: the highest bid you can enter and still make the profit you want. Set that number before the lot closes and don't go above it.

What you need before you start

The formula

Max hammer = (Net from eBay sale − minimum profit − inbound shipping) ÷ ((1 + buyer's premium) × (1 + tax rate))

Where:

Net from eBay sale = Sold median − eBay fees − outbound shipping

If the lot isn't taxed, leave out the tax term. If tax is charged on the hammer only and not on the premium, the divisor is slightly different. For small lots the difference is pennies, and using the stricter version above keeps you on the safe side.

Then round down to the auction's bid increment. If the formula gives $8.33 and bids go up in $1 steps, your cap is $8.

Step by step

  1. Find the Sold median. List recent Sold prices for the exact model in comparable condition and take the middle value, not the highest. If condition in the lot photos is unclear, use the lower end.
  2. Work out eBay fees on that price. On many categories eBay charges its percentage on the total the buyer pays, sales tax included, plus a fixed per-order fee. Calculate fees on that total, not just your item price.
  3. Subtract outbound shipping. Include the mailer or box, not only postage.
  4. Subtract your minimum profit.
  5. Subtract inbound shipping. Use the auctioneer's written figure. If you only have your own estimate, label it as an estimate and treat the result as provisional.
  6. Divide by (1 + premium) and (1 + tax). This converts what you can afford to pay all-in into the highest bid you can make.
  7. Round down to the bid increment and write the number down before the lot goes into its closing period.
  8. Check backward. Multiply your cap by the premium and tax, add shipping, and confirm the total still leaves your profit.

Worked example: a used multi-tool lot

These numbers are illustrative assumptions to show the math. They are not a pricing claim for any item. Replace each one with your own figures.

Step 1-3: Net from the sale

Step 4-5: Money left for the bid itself

Step 6: Divide by the premium

Step 7: Round down

Step 8: Check backward

If the lot were taxed at 8%, the divisor would be 1.20 × 1.08 = 1.296, and the cap would drop to $9.99 ÷ 1.296 = $7.71, which rounds to $7.

How sensitive the cap is

Using the example's fee and outbound assumptions with a $10 profit target:

| Sold median | Inbound shipping | Premium | Max hammer (before rounding) | |---|---|---|---| | $35 | $12 | 20% | $1.22 (effectively PASS) | | $40 | $12 | 20% | $4.77 | | $45 | $12 | 20% | $8.33 | | $45 | $8 | 20% | $11.66 | | $45 | $12 | 10% | $9.08 | | $49 | $12 | 20% | $11.17 |

Three points stand out:

Fill-in worksheet

Copy this into your notes for each lot:

Common mistakes

When to pass

Pass, with no cost to you, if any of these apply:

A pass costs nothing. A lot you won above your cap starts at a loss before you've listed it.

Want the full done-for-you kit?
Pass-by-Default Auction-to-eBay Flip Kit: Bid Cap Calculator, Buy Sheet and Listing Templa · $14.99
Get it on Gumroad